FARO UK invites you to the Large Volume Metrology Conference & Exhibition (LVMC), the only European event solely dedicated to portable and large volume 3D measurement technology.
We will be presenting our cutting-edge metrology products: the FARO Edge ScanArm HD, with a built-in touchscreen computer and new Laser Line Probe HD; the FARO Gage with the barcode scanner, the revolutionary FARO Laser Scanner Focus3D, as well as our latest and most accurate FARO Laser Tracker Vantage for large volume measurements.
The LVMC offers you the unique opportunity to see presentations from industry experts, view the latest equipment from the world’s leading suppliers, network and share ideas, talk to suppliers and increase your awareness of the European and worldwide industries.
Date: 19th November – 20th November 2014.
Location: Mercure Manchester Piccadilly
Visit the official exhibition website to register your visit!
One major aspect of automotive and aerospace manufacturing has long been that the critical nature of the final products they build requires their parts and sub-components to be free of defects.
However, the need for manufacturers to keep costs down and efficiency up in order to remain competitive in the marketplace has a negative effect on the manufacturers’ ability to ensure totally defect-free parts.
A check fixture is a device that allows production parts to be inspected by comparing the part to the geometry and features of the fixture. If the part and check fixture fit together, the part is “good”.These check fixtures, used in conjunction with hand tools, have provided a balance between the need to keep costs down and part integrity.
Given that check fixtures are extremely expensive and require a large time investment, it is not surprising that firms are now turning to the latest technology to help them eliminate check fixtures from their processes. Portable CMMs offer the ideal solution for keeping costs down and ensuring defect-free parts. Portable CMMs come in many forms, the most common of which are laser trackers, articulating arms and hand-held 3D Laser Scanners.
The choice of technology is based on the parts being measured and the information you need from the parts, and provides a cheaper alternative to the expense of check fixture. Portable CMMs eliminate the need for storage, maintenance and rework costs for check fixtures not currently in use.
Click here to download the full white paper to read more!
FARO UK is happy to announce that we will be participating at this year’s Aero Engineering 2014!
Now in its 6th year, the ‘Aero Engineering Show’ 2014 will host 200+ specialist aerospace-related exhibitors displaying solutions ranging from materials processing technologies to digital design & manufacturing solutions, from test & measurement to process engineering…and much more.
Aero Engineering gives you the unique opportunity to see the leading technology suppliers & supply chain partners/services supporting current & future aerospace engineering supply chain programmes.
At the event we will show you how you can both save time and improve quality by using our portable 3D measurement equipment such as the FARO Gage, FARO Laser Tracker, FaroArm and the brand new FARO Edge ScanArm HD.
Date: 11-12th November
Stand: G38, Hall 5
Location: NEC, Birmingham
For more information visit the official Aero Engineering website or email email@example.com
Durham Oktoberfest, the north east’s premier engineering and manufacturing show is the driving force for the promotion of engineering and manufacturing in the north east region and is being held on 23rd October 2014 at the Xcel Centre in Newton Aycliffe.
FARO offers you the opportunity at Durham Oktoberfest 2014 to meet one-on-one with FARO experts and receive a demonstration of our impressive range of 3D measurement and imaging solutions, including the FARO Arm, FARO Gage and FARO ScanArm
We are happy to also announce that our brand new FARO Edge ScanArm HD, the world’s most affordable, high performance contact & non-contact portable measurement system on the market, will be showcased and demonstrated to attendees at Durham Oktoberfest.
Date: 23rd October
Stand No: 83
Location: The Xcel Centre
Long Tens Way
Aycliffe Business Park
County Durham DL5 6AP
For more information visit the event website or email firstname.lastname@example.org
Evotech, based in Villa Agnedo (Trento, Italy), is a company with an international reach that manufacturers special aftermarket accessories and components for sport and naked bikes.
Particular attention is paid at Evotech to the development of products that celebrate the concepts of design, functionality and ease of assembly. Evotech is therefore one of the points of excellence of ‘Made in Italy’ manufacturing, and has been able to raise its technological level by investing a good percentage of its yearly profits in research and development and cutting-edge production facilities.
– Benelli compressor by Evotech –
In 1972, following a distinguished career in the automotive industry, Gian Paolo Dallara founded Dallara Automobili near Parma, Italy. Since then, the company has expanded, designing and building cars for
almost all of the racing competitions and winning races worldwide.
Dallara is a success story, the result of a passion for mechanics, involving the company’s 180 employees on a daily basis, with all employees at Dallara working with passion and skill on high-technology projects in order to gain the edge in the fiercely competitive world of motor racing.
In particular, it is absolutely crucial that each stage of production and assembly carried out in the factory is tested and validated using adequate measurement and control procedures.
FARO UK invites you to the Northern Manufacturing & Electronics Event, the largest exhibition in the UK dedicated to serving the needs of manufacturing and electronics industries in the North of England.
The two-day long event will be held in Manchester at the ‘Event City’ and will run from 1st – 2nd October.
We will present our cutting-edge metrology products such as; the FARO Edge with the fastest and most accurate Laser Line Probe yet and touchscreen computer for basic measurements, the FARO Gage with barcode scanner and the FARO Laser Tracker Vantage for large volume measurements.
With the recent launch of the FARO Edge ScanArm HD, this event will give you the opportunity to meet one-on-one with FARO team members and receive a demonstration of the new Laser Line Probe HD!
Dates: 1st – 2nd October 2014
Location: Event City, Manchester
For more information email email@example.com…FARO looks forward to welcoming you!
Take a look at the new FARO Edge ScanArm HD in action – the world’s most affordable, high performance contact & non-contact portable measurement system on the market!
For more information visit: http://www.faro.com/products/metrology/faro-scanarm/overview
Want to see the latest and greatest scanning technology for the automotive sector? Then register today for the free webinar and see how the advanced FARO Edge ScanArm HD enables fast and efficient non-contact measurements of complex parts.
The FARO ScanArm is the perfect solution for inspection, point cloud-to-CAD comparison, rapid prototyping, reverse engineering and 3D modelling, and no matter what your specific requirement is, we provide the best solution for a wide range of applications across all industries.
Date: 24th September 2014 at 2pm GMT +1 (London – Dublin)
Interested? Click here to register your attendance!
With the power of the new high-definition Laser Line Probe HD 3D scanner and the flexibility of the FARO Edge measuring arm, the FARO Edge ScanArm HD really is the world’s most affordable, high performance contact & non-contact portable measurement system on the market.
The brand new Edge ScanArm HD offers rapid point cloud collection with extreme resolution and high accuracy – all in a compact and easy-to-use system.
The new features of the Edge ScanArm HD allow users to seamlessly scan across diverse surface materials regardless of factors such as contrast, reflectivity or part complexity and without any special coatings or target placement.
In addition, scanning time is reduced and coverage is increased due to the fast frame rate and the extra wide scan stripe . Intricate components can now be captured in fine detail as a result of the 2,000 actual points per scanline and the new blue laser featuring noise reduction technology. In addition, users can dramatically reduce required training time with the new crosshair feature and existing LED Rangefinder functionality, which provides real-time scanning feedback.
The Edge ScanArm HD will be available for live product demonstrations at the TCT Show, Birmingham (Stand B24, Hall 3A) – from 30th September to 2nd October 2014 !
More information at: