Junaid Asghar | FARO UK Blog - Part 4
Aug
25
2016

Westerhof BV

In recent years, modern machine factories have made a strong shift in professionalizing their measuring solutions. In particular engineering factories made for specialized industries such as automotive, Oil and Gas. The main reason is that these sectors constantly require new machinery to be integrated in existing production lines. Accuracy is always a key element in this engineering process, therefore, machine factories are making a shift from manual measurements to new solutions such as 3D laser measurement.

 

 

Westerhof BV is a versatile and modern machine factory that has been going strong in the Nether-lands for over 50 years. One of Westerhof ’s main tasks is the conceptualisation, creation and imple-mentation of new machinery in existing production lines. A high level of accuracy in the preliminary measurements is vital for the basis of a precise 3D model of the machine. In the past this was the main problem as all Westerhof ’s measurements for their 3D models were done manually.

“If that happens, we have to reengineer the entire machine, causing a large financial cost for both us and the client. Because if this, we looked for a solution that gave us perfect accuracy, to avoid these mistakes,” Thijs Lenferink, commercial technical advisor at Westerhof BV explains.

The engineers at Westerhof found this solution in the FARO Focus 3D X130 laser scanner and the FARO Gage, which were able to provide the accuracy that was required for their clients. “We did some market research and eventually chose the FARO Focus 3D X130 and the FARO® Gage for the creation of 3D models and gauging of existing machinery, due to their accuracy, high quality and user-friendliness,” Lenferink explains.

Read more

Aug
22
2016

Argon Measuring Solutions NV

As part of its services to clients especially those in the gas and electricity sector, ARGON offers measuring solutions to determine when maintenance of its devices is necessary. Careful decisions regarding maintenance have to be as cost effective as possible.

Before going over to the FARO Edge ScanArm and FARO Laser Tracker, ARGON saw that the previous hardware that was offered didn´t meet ARGON´s requirements according to Stijn De Leener, Finance, HR and Administration at ARGON: “The previous devices were too difficult to handle for our engineers and especially for the clients. In addition, the point cloud was too small  for our line of work and the accuracy needed improvement since the more accurate you can be, the better informed your decisions can be. Because of this we made the switch to the FARO Edge ScanArm and this in combination with the FARO Laser Line Probe has brought spectacular results.”

ARGON MS 1

 

3D CORROSION SCANNING WITH THE FARO EDGE SCANARM

As part of its pipeline integrity management, a main independent operator of both the natural gas transmission and storage infrastructure in Belgium monitors corrosion on its gas transport pipelines with the help of ARGON and the FARO ScanArm. 3D scanning increases the accuracy of the corrosion measurements, leading to better informed decisions and lower repair costs. Quantification of this corrosion is not easy since pipes are curved and corroded spots have complex shapes. Traditional measurement methods like calipers are often unusable and very conservative, giving less accurate values of the corrosion state. Using the FARO ScanArm, ARGON is able to make a 3D copy of a corroded area.

Read more



FARO UK Blog

Stay up to date with the latest news and trends in industrial metrology and 3D documentation.

Subscribe to our Blog

FARO Local

Follow us:

Archives