As part of its services to clients especially those in the gas and electricity sector, ARGON offers measuring solutions to determine when maintenance of its devices is necessary. Careful decisions regarding maintenance have to be as cost effective as possible.
Before going over to the FARO Edge ScanArm and FARO Laser Tracker, ARGON saw that the previous hardware that was offered didn´t meet ARGON´s requirements according to Stijn De Leener, Finance, HR and Administration at ARGON: “The previous devices were too difficult to handle for our engineers and especially for the clients. In addition, the point cloud was too small for our line of work and the accuracy needed improvement since the more accurate you can be, the better informed your decisions can be. Because of this we made the switch to the FARO Edge ScanArm and this in combination with the FARO Laser Line Probe has brought spectacular results.”
3D CORROSION SCANNING WITH THE FARO EDGE SCANARM
As part of its pipeline integrity management, a main independent operator of both the natural gas transmission and storage infrastructure in Belgium monitors corrosion on its gas transport pipelines with the help of ARGON and the FARO ScanArm. 3D scanning increases the accuracy of the corrosion measurements, leading to better informed decisions and lower repair costs. Quantification of this corrosion is not easy since pipes are curved and corroded spots have complex shapes. Traditional measurement methods like calipers are often unusable and very conservative, giving less accurate values of the corrosion state. Using the FARO ScanArm, ARGON is able to make a 3D copy of a corroded area.